Skip to content

ADDRESSABLE MANUAL PULL STATION | INTELLIGENT FIRE ALARM CONTROL PANEL

Original price 56.800 OMR - Original price 56.800 OMR
Original price
56.800 OMR
56.800 OMR - 56.800 OMR
Current price 56.800 OMR

Key Features & Operation

* Identification: Each station is assigned an address (via rotary dials, DIP switches, or EEPROM/software programming) so the panel recognizes its precise physical location.
* Action Types: Available in single-action (pulling the handle directly) or dual-action (pushing or lifting a cover before pulling the handle) to prevent accidental alarms.
* Status Indicators: Built-in bi-colored LEDs typically flash green in normal standby and turn solid red during an alarm state.
* Reset Mechanism: Uses a key, hex wrench, or screwdriver tool to reset the lever and internal switch after activation.

Installation & Code Guidelines (NFPA 72)

* Mounting Height: The center of the pull station must be installed between 1.07 meters (42 inches) and 1.22 meters (48 inches) above the finished floor level.
* Location: Must be mounted within 1.5 meters (5 feet) of exit doorways in plain sight and along normal paths of egress.
* Spacing: Travel distance to the nearest pull station should not exceed 61 meters (200 feet).

Common Manufacturers & Models

  • Notifier: NBG-12LX (dual-action, FlashScan/CLIP compatible)
    * Simplex: 4099-series addressable manual stations
    * Hochiki: DCP-AMS series
    * Maple Armor: FW2721 / FW2722 / FW2723 series

 

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare